强夯置换法是选用在夯坑内回填块石、碎石等粗颗粒资料，用夯锤夯击构成接连的强夯置换墩。强夯置换法一般适用于高饱满度的粉土与软塑~流塑的粘性土等地基上对变形操控要求不严的工程。
The dynamic compaction replacement method is to select coarse grained materials such as backfilling stones and crushed stones in the compaction pit to form successive dynamic compaction replacement piers by ramming hammer. Dynamic compaction replacement method is generally applicable to projects with low requirements for deformation control on silt with high saturation and clay with soft-plastic to fluid-plastic properties.
强夯工程选用的夯击能一般为1000~8000kN.m，也有少数地基选用更高的夯击能，所处理的场所大多数为劈山填海及山地沟谷回填的地基，如回保定平面设计培训 保定室内设计培训   保定厨房排烟 雄安管道通风 填土首要为碎石素填土，则非常适宜强夯处理。
The tamping energy used in dynamic compaction projects is generally 1000~8000kN.m, and a few of the foundations have higher tamping energy. Most of the sites treated are the ground filled by hill-splitting reclamation and mountain valley backfill. If the backfill is mainly gravel filling, it is very suitable for dynamic compaction.